Husqvarna 555FX

Husqvarna 555FX

Contact us for price

Stock status: Call Store for Availability

Husqvarna aims to deliver orders promptly, so changes or cancellations are not accepted once an order is placed.

Husqvarna offers a refund for online purchases if you are not satisfied, minus any shipping or restocking fees.

At Husqvarna, we’re committed to ensuring your satisfaction. Our warranty covers any defects in material or workmanship under normal use during the warranty period.

Husqvarna 555FX is a very powerful clearing saw developed for full time spacing tasks in tough conditions. The X-Torq® engine provide raw power, rapid acceleration and excellent fuel economy. Short tube and bevel gear angled 24 degrees simplifies directional felling in dense forests. Very low vibrations thanks to LowVib®. Delivered with Balance XT harness.

Call Us Now

Specs

Scarlett 225-24 (1"), US50 ex Lowes SKU: 966 62 91‑06
Engine	Scarlett 225-24 (1"), US50 ex Lowes SKU: 966 62 91‑06
Output shaft power ¹	3.8 hp
Cylinder displacement	3.3 cu.inch
Fuel tank volume	37.2 fl oz
Fuel consumption	480 g/kWh
Maximum power speed	9,000 rpm
Idling speed	2,800 rpm
Maximum rpm output shaft	10,500 rpm
Clutch engagement speed (±120)	5,700 rpm
Electrode gap	0.02 in
Ignition module air gap	0.01 in
Torque, max.	3.5 Nm
Torque, max. at rpm	6,900 rpm
Equipment
Saw blade	Scarlett 225-24
Harness	Balance XT2
Transmission
Gear ratio	1.29
Drive gear angle	24 °
Dimensions
Weight (excl. cutting equipment)	19.6 lbs
Tube diameter	1.38 in
Sound and noise
Sound power level, guaranteed (LWA)	117 dB(A)
Sound pressure level at operators ear	103 dB(A)
Vibration
Equivalent vibration level (ahv, eq) left handle	2.1 m/s²
Equivalent vibration level (ahv, eq) right handle	2.3 m/s²
Emission
Exhaust emissions (CO₂ EU V) ²	1,000 g/kWh
Control
Connectivity	Not applicable
Lubricant
Lubricant type (bevel gear)	Mineral grease

2811 University Dr NW

(256) 536-9404

Specs

Output shaft power

Cylinder displacement

Fuel tank volume

Fuel consumption

Maximum power speed

Idling speed

Maximum rpm output shaft

Clutch engagement speed (±120)

Electrode gap

Ignition module air gap

Torque, max.

Torque, max. at rpm

Saw blade

Harness

Gear ratio

Drive gear angle

Weight (excl. cutting equipment)

Tube diameter

Sound power level, guaranteed (LWA)

Sound pressure level at operators ear

Equivalent vibration level (ahv, eq) left handle

Equivalent vibration level (ahv, eq) right handle

Exhaust emissions (CO₂ EU V)

Connectivity

Lubricant type (bevel gear)

Schedule Service

General Contact

Parts Request